Eligible Serial Numbers(Stock):
18253559 - 18255059 (VIA SA00780NY KIT)
18255059 - 18256684 (STOCK INSTALL)
18255685 - 18257608 (SEE NOTES)
18257609 - 18260445 (STOCK INSTALL)
NOTES: This shroud draws Cabin Heat air from the 0750128-20 Co-Pilot Engine Baffle. Both the Inlet and outlet are on the aft side of the shroud.
1) This shroud is designed for Aircraft Equipped with STC SA00780NY and is Pre-Modified per the Drawing C62A supplied with the muffler. Alternately you may order a un-modified shroud under part number 0750161-40AWL.
2) Aircraft equipped with a SeaPlanes West Engine mount and STC SA00780NY need to offset the cut out from drawing C62A in a way so the hose fittings clear the engine mount tube immediately aft of the shroud. If you have a SeaPlanes West Engine Mount use PN 0750161-40AWL
3) Aircraft equipped with a SeaPlanes West Engine mount and a stock Cessna Muffler need to order PN 0750161-40AWL and use 401-7 Exhaust Muffler Doubler Supplied with the Engine mount to relocate the tailpipe hole so the hose fittings clear the engine mount tube immediately aft of the shroud.
4) Aircraft 18255685 - 18257608 equipped with original exhaust stacks(15.25"-15.5" In length) should use Shroud 10182-049-1. Aircraft equipped with 0750238-20AWL exhaust stacks are 15" in overall length can use this shroud. Refer to Cessna SL67-37.