This Part is obsoleted and has been replaced with 0750238-20AWL with 0750238-5AWLcenter Stack. Exhaust Stack 0750238-200AWL which is 15." Tall. Installation of the correct stack is critical to clear the intake air duct on aircraft. On aircraft SN 18256685 thru 18257608 both exhaust stacks must be changed to 0750238-20AWL or 10182-049-1 shroud must be used or there will be contact between the muffler shroud and the intake duct(Refer to Cessna SL67-37). On Aircraft 18051313 - 18051551 and 18255059 - 18256329 you will either need to procure 0750225-1/-2 clamps to mount 0750607-4/-5 Carb heat shrouds or install SK182-78.
NOTE: This exhaust stack is designed for use on the O-470 Series engines only. Using it on IO-520, IO-550 or up-rated engines by STC will reduce the service life of the exhaust stack and may cause it to crack.
*Contact Acorn Welding For Details