This part Number was Originally Equipped on aircraft 18257599 - 18260445 and A182-0055 - A182-0136
The contents of this kit are the Current Day Equivilant parts and not those that originally defined this kit. This Kit Configuration incorporates Acorn Exhaust Muffler C-1851D-3 as Part of STC SA00780NY
NOTE: This exhaust Kit contains stack 0750238-20AWL which is 15." Tall and has a center slip riser PN 0750238-5AWL. Installation of the correct stack is critical to clear the intake air duct on aircraft. On aircraft SN 18256685 thru 18257608 both exhaust stacks must be changed to 0750238-20AWL or 10182-049-1 shroud must be used or there will be contact between the muffler shroud and the intake duct(Refer to Cessna SL67-37). On Aircraft 18051313 - 18051551 and 18255059 - 18256329 you will either need to procure 0750225-1/-2 clamps to mount 0750607-4/-5 Carb heat shrouds or install SK182-78.
NOTE: This exhaust stack is designed for use on the O-470 Series engines only. Using it on IO-520, IO-550 or up-rated engines by STC will reduce the service life of the exhaust stack and may cause it to crack.
*Contact Acorn Welding For Details
^See SL67-37