Mouse over to zoom in
Aerocet® Model 6650 Amphibious Floats
With the ability to land on both land and water, the 6650 amphibious floats for the KODIAK 100 Aircraft offer the ultimate upgrade to this extreme flying machine. With our state of the art design and user friendly features, our amphibious light weight carbon composite floats mean the KODIAK truly can go where other planes simply can not.
Aerocet® 6650 series floats offer unmatched performance in the straight float category. The 6650’s are both structurally and hydrodynamically advanced, and with a rivet free construction, we continue to be the best looking.
Take a look at the composite construction that defines our floats as the strongest, lightest, and best looking. Our hardware assures you of the strongest fit and easiest installation.
Part Number: Aerocet 6650 Kit
Highest standard Gear Advisory System
- Audible announcement for gear positions and “check gear” conditions
- Hydraulic pump running indicator
- Illuminated indicators for each gear wheel and each position
- Backlit display for easy reading
- Dimmer adjustment
- Indicator lights “Test” feature
- Acknowledged by both pilots and aviation officials, keeping safety a top
priority.
Electric Hydraulic Pump System
- Far aft placement for nose gear CG compensation
- Low average pressure (500 psi) is easy on the lines reducing overall
maintenance - Built in pressure relief guards against over pressure from thermal or
hand pump inputs - Simplistic reversing motor eliminates complex flow control valves and
systems - Reservoir and site glass are built into hydraulic power pack for easy fluid
level reading - Internal filters to guard against debris in hydraulic system reducing wear
Mounting hardware designed and tested to FAR requirements
Custom Designed Main Gearbox
- Minimizes displacement for improved floatation.
- Watertight seamless design means less water pumping.
- Easy access to all hardware, reducing maintenance time.
- Easy-to-clean and service, ease of replacements.
Oleo Shock System
- Trailing arm link provides a no-bounce smooth ride.
- Metering pin tailored toward comfort during taxi, yet able to handle harsh landings.
- Pressure adjustable to match aircraft gross weight.
- Built in prevention of water infusion.
- Cost effective, easy to find and replace “off-the-shelf” seals and wiper rings.
- Aerocet®-manufactured nose wheel means Aerocet® quality, and we always have parts in stock.
Sliding, Retractable Nose Gear
- Utilizes a no-maintenance composite spring that eliminates soft forward diving in crosswinds or under braking.
- No nose wheel well, which provides maximum displacement efficiency.
- Aluminum bronze slide bushings designed to handle ultimate loads without breakage.
- Tire retracts to provide bumper.
- Angle of nose spring is optimized to reduce shimmy potential.
Nose Wheel Assembly
- Aerocet®-manufactured nose wheel means Aerocet® quality, and we always have parts in stock.
- Spoked wheel design eliminates water cavity.
- O-ring interface between wheel halves for better sealing and less maintenance.
- Standard “off-the-shelf” bearings.
- Manufactured from 6061 billet, anodized and top coated for long life corrosion protection.
- Fully TSO approved by the FAA.
Performance Composites
- By far the most technically advanced floats in the history of aviation
- Proven to be the most useful load in the industry.
- Infusion composite construction process allows these larger floats to weigh in at less than smaller floats that have less displacement.
- Extra flotation and no extra weight or speed penalty, for increased safety at gross weight.
- Clean floats and aerodynamic rigging gives a cruise speed increase over other designs.
- The most forgiving floats for novice and pro alike.
- Very slippery – minimal sensation of acceleration is felt after leaving the water.
- Getting on the step is reached very quickly to get you off the water and into the air fast.
Smart Design
- Double-fluted design delivers superior strength to weight ratings.
- Molded-in boarding steps.
- Sharp edges for reduced drag and increased hydrodynamics.
- Best design for performance in both rough water and smooth water conditions.
Built to Last
- No corrosion like with aluminum based floats.
- No rivets, means no rivet leaks.
- Common aerospace carbon fiber and simple easy-to-use vinyl ester resin.
- Non-sandwich bottom skin, makes any field repair an easy process.
- High impact sandwich core used on top and sides adds durability and strength
Compartments
- Nine watertight compartments
- No large holes for rudder controls, which could cause easy flooding.
- Large access panels with integrated preflight pumpouts that use all stainless hardware.
- Six storage lockers, four forward two stern, with super large access doors and optional floorboards for flat storage.
Hardware
- Stout attach fittings for “up gross” strength
- A mechanics delight for installation, a simple and complete kit
- All fittings swaged to fit
- Extensive use of anticorrosive 300 stainless steel throughout
- Best Cabin Entry and Fueling Step layout-looks good, works great
Hull Protection
- Aluminum keel wear strip that is rugged and easily replaced.
- Special aluminum chine rub strip designed to resist constant abrasion and provides another seam overlap.
Spreader Bar
- New extrusion design with internal shear web.
- Impervious to crushing under forklift and clamping loads.
- Simple, high strength, lightweight spreader bar socket with integral grease fittings.
Water Rudders/Steering
- Simple external rigging
- Utilizes large stainless tiller posts
- No rubber seals to crack and leak
- No deck cables and turnbuckles to trip on
- Maximum maneuverability with large rudders
- Very positive steering-effective for rivers and wind