Maintenance is a major requirement for any machine. Frequency checks and timely maintenance increase the life of machinery. Aircraft maintenance is required every so often. Aircraft inspection is done before and after every flight. Thus, minor or major maintenance is carried out after a detailed inspection.
After the development of an aircraft, the two most important phases of its life are inspection and maintenance. A Good maintenance provider can improve the efficiency of an aircraft's engine and parts. The ratio of air crashes can be minimized with timely maintenance.
Also read: WHAT IS AIRCRAFT PREVENTIVE MAINTENANCE?
Maintenance Process
The maintenance process of an aircraft starts after the first flight. The process includes deep inspection and maintenance activities. It is quite possible that your aircraft will not need a whole lot of maintenance for years, but a little care can improve its performance.
The operational phase of an aircraft’s life involves maintenance. The process involves a few steps including:
- Planning
- Inspection
- Availability of spare parts
- Logistic support
It is crucial to cover all steps to carry out a successful maintenance process. Planning outlines the steps and activities carried out during the whole process. The aircraft becomes more efficient, reliable and safe due to regular and timely maintenance.
During the inspection, any defects and flaws are identified in the system. The enlisted faults are detected on the basis of common risks which become a cause of most accidents. The maintenance is done on the inspection report, which includes the details of faults and improvements needed in the aircraft. Thus, efficient maintenance is dependent on inspection.
Resources are required for the repair or maintenance of an aircraft. The resources are gathered according to the model and type of aircraft. If you have accurate details about the faults of an aircraft, you can select accurate resources which are mandatory for cost-effective maintenance.
Logistics support will give efficient service of maintenance. Improve the efficiency of the aircraft’s performance. Thus, the process involves many steps, each is equally important and affects its successor and predecessor steps.
Types Of Aircraft Maintenance Processes
There are two types of maintenance: one is scheduled, and the other is an unscheduled method of maintenance. Both methods are suitable according to the maintenance requirement and conditions of the aircraft.
- Scheduled Maintenance - This type involves proper planning to start the process. The schedule is created according to the flight schedule, timings, and dates.
- Unscheduled Maintenance - in this type of aircraft maintenance process the process is started urgently due to a failure, fault, or risk of accident in the aircraft. The process can take a long time or it can end in a short time, depending on the maintenance needs.
Advantages Of Timely Aircraft Maintenance
Safety is improved by regular maintenance of the parts and engines of the aircraft. The risk of any damage, accident or fault during flight is minimized due to timely inspection and maintenance.
- The reliability and durability of aircraft parts improve as the issues are identified and corrected quickly.
- Less maintenance cost is required if issues are controlled on time. If maintenance on the engines parts are done regularly, it is quite possible that the faults will be controlled at an early stage.
- Risks are identified and mitigation strategies are developed to minimize issues during flight.
Aircraft maintenance cost and efforts are minimized with the help of routine maintenance processes. An efficient aircraft has minimal chances of an accident. An efficient aircraft maintenance routine can be a lifesaver for aircraft passengers, drivers and staff. It will also save the aircraft company from big aircraft damage. By increasing the maintenance intervals, the effectiveness of the aircraft’s engine is also improved. It is recommended to carry out a scheduled maintenance process as it is safe and solves aircraft issues.
About Acorn Welding
Acorn Welding is one of the top aviation repair and maintenance specialists based in Canada. We can provide maintenance and repair services for helicopters, homebuilt aircraft, vintage aircraft, warbirds, engine mounts, light sport aircraft, and tubular structures. We provide maintenance and repair of the parts attached inside these such as air conditions, heating systems, air ducts, bleed air ducts, carb air boxes, exhaust system piper exhausts, carb heat boxes, and fuel tanks. Our experts can also provide efficient services for design & drafting, Laser/WaterJet cutting, and consultation services. If you need any type of repairing or maintenance of the above-mentioned objects we are available to serve you. Please contact us and book an appointment.
