McFarlane Aviation's D A M™ Exhaust Lube
Aircraft Exhaust Anti-seize/Lubricant — The only anti-seize that works!
D A M Exhaust Lube is designed specifically for aircraft exhaust ball joints, clamps, slip joints, and hardware. A low viscosity liquid is blended with molybdenum-disulfide and other special micro-lubricants to produce a protective dry lubricant film. This film imbeds into the stainless steel and keeps your joints lubricated for years!
- Protects up to 2400° F
- No stainless corroding graphite
- Prevents heat corrosion and joint lockup
- Joints stay free to move with thermal expansion
- No greasy powdered metal paste that locks up anyway
- Low viscosity — a little goes a long way
- Loosens assembled joints
Note: Do not use an anti-seize that contains graphite on your exhaust systems. Graphite corrodes and destroys the grain structure of stainless steel. D A M™ Exhaust Lube does not contain graphite.
Shipping Note: This product can only ship via Domestic Ground service. Air and International shipments are not available at this time. For customers located in the United States, this product is available Directly from McFarlane Aviation.
Pre-assembly: Clean joint and apply a wet coat to both surfaces to be joined. The joint can be assembled wet or dry.
Assembled joints: Apply several times to joint edge. Allow time for capillary action to penetrate the joint. For better penetration of locked up joints, mix 50/50 with acetone, MEK, toluene, or similar solvents.
FOR BEST RESULTS, APPLY BEFORE ASSEMBLY
(Can also be applied to joint edges on older assemblies)